I have modified an existing model file of a photo-etched stainless steel plate, which is bent at an angle along a form line. I have two reference sets in my model, one of the flat plate (called FLAT_FORM) and one of the part after it is bent into shape (called CLAMP_IN_SITU). I want to create two drawing sheets, the first showing the reference set FLAT_FORM and drawing sheet 2 showing CLAMP_IN_SITU. Can somebody please explain how I would do this? From what I can see I can only select one reference set which will appear on all of my drawing sheets.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reference sets on separate drawing sheets 1
- Thread starter carrols8
- Start date
-
1
- #2
Add it as a component twice; use the first reference set on one instance and the 2nd reference set on the other instance. Use "hide component in view" or "layer visibility in view" to selectively hide the version you don't want to see.
www.nxjournaling.com
www.nxjournaling.com
- Status