Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recommended number of LV cables in cable truncking

Status
Not open for further replies.

shlim

Electrical
Joined
Mar 24, 2013
Messages
29
Location
MY
Hi there,

I came across with a small fire incident within an old building (said to be 40-50 years old) at the incoming LV power supply cabinet. I noticed that there were signs of arcing on the cable trunking (at the bend section) housing the power cables into the cabinet. The cable trunking were 'packed' with quite a number of cables.

Are there any references (Installation Guide, Standards or Code of Practice) that I can refer to, pertaining to the recommended number of cable that could be fitted in a cable trunking system for certain dimensions? I have check the Wiring Regulations 17th Edition, and there was little mention about cable trunking/ducting system(when compared to cable trench method).

Thank you.
 
Thank you Sir, that is a good start for me. I will try look further into this, ie. cable trunking factor.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top