Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rebars definition in ETABS

Status
Not open for further replies.
Shyaka Regis

Shyaka Regis

Structural
Joined
Jun 20, 2020
Messages
2
Location
RW
Is there any option of selecting rebars strength when designing a reinforced concrete structure according to Eurocode 2 in ETABS? When am defining rebars parameter in ETABS (design using Eurocode 2), i don't get an option of choosing rebar yield strength as it is in other different standards or codes.
So, Is there any way i can get rebars yield strength according to Eurocode 2 in ETABS?

Here I attached a picture of what am talking about.


Regis
 
 https://files.engineering.com/getfile.aspx?folder=6636d068-4f61-4811-9304-f2762b707461&file=rebars_strength.png
Status
Not open for further replies.

Similar threads

gatossi
  • Locked
  • Question Question
Category M equivalent in EN 13480
Replies
1
Views
984
XL83NL
XL83NL
Alex.hwang
  • Locked
  • Question Question
Lethal service (Toxic, dangerous fluid) fillet weld nozzle in EN code
Replies
2
Views
988
Hoxton123
Hoxton123
xinloinhe
  • Locked
  • Question Question
EN 10204 number on Inspection certificate
Replies
6
Views
1K
kingnero
kingnero
papajorgio
  • Locked
  • Question Question
Can EN 10204 Type 3.1 certs be created internally?
Replies
2
Views
2K
kingnero
kingnero
deco0404
  • Locked
  • Question Question
Different interpretation of points in EN standards
Replies
0
Views
227
deco0404
deco0404

Part and Inventory Search

Sponsor

Back
Top