Alex.hwang
Mechanical
According to ASME, if fluid is lethal service (Toxic, dangerous fluid), slip on flange(fillet welding) is not allowed.
PED or EN code have similar rules?
PED or EN code have similar rules?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Lethal service (Toxic, dangerous fluid) fillet weld nozzle in EN code
- Thread starter Alex.hwang
- Start date
- Status
PED is not a design code. EN 13445 doesn’t have such requirement either. There are however few other service driven (mainly due to temperature) limitations but they’re linked to fluid groups or such.
Huub
- You never get what you expect, you only get what you inspect.
Huub
- You never get what you expect, you only get what you inspect.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
