beginneransys
Mechanical
Hi every one ,i want to simulate forces apply by fluid on mechanical components of the pump (bearing ....).
any help please
any help please
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
real probleme 2
- Thread starter beginneransys
- Start date
- Status
-
1
- #2
I will offer a few suggestions that may help you get the information you require.
It is always better to use a descriptive title. I would suggest something more like this: Simulation of Forces Applied to Pump Components by Fluid Pressure.
You should expect to provide much more details about the specific problem you are trying to solve. For examples:
What type of pump are you examining? Centrifugal? Positive Displacement?
What service is the pump used in?
What is the basis of this exercise? Are you attempting to solve a specific problem or analyze a specific failure scenario?
Please provide a drawing, sketch or diagram showing the forces you are concerned about.
The more you give, the more you are likely to get in return.
Johnny Pellin
It is always better to use a descriptive title. I would suggest something more like this: Simulation of Forces Applied to Pump Components by Fluid Pressure.
You should expect to provide much more details about the specific problem you are trying to solve. For examples:
What type of pump are you examining? Centrifugal? Positive Displacement?
What service is the pump used in?
What is the basis of this exercise? Are you attempting to solve a specific problem or analyze a specific failure scenario?
Please provide a drawing, sketch or diagram showing the forces you are concerned about.
The more you give, the more you are likely to get in return.
Johnny Pellin
-
1
- #3
- Status