When I use raster manager to bring in a photo with a world file with english units, Microstation is applying a scale factor as if the photo was metric. When this happens with a reference file, my fix is to turn true scale off and reset the reference scale to 1:1. I have not been able to find a way to do that with raster manager.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
raster scale
- Thread starter jeremyk55
- Start date
jeremyk55,
What do the Workspace Preferences look like for you. My guess it is set to Metric like the attached screen shot.
Try changing it to Feet to match your world file and see if that helps.
Bob Mecham
Training | Consulting | Programming
Facebook: Twitter:
What do the Workspace Preferences look like for you. My guess it is set to Metric like the attached screen shot.
Try changing it to Feet to match your world file and see if that helps.
Bob Mecham
Training | Consulting | Programming
Facebook: Twitter:
- Status
Similar threads
