Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Radiography Quality Steel Casting
- Thread starter Jayant
- Start date
Please be more specific about the level of acceptance of defects to be qualified as a radiographically sound casting. There are different levels of acceptance starting from Level 1 to level 3. Yield of a casting cannot be directly related to the soundness of the casting. It will depend on the geometry of the casting and the methoding being done. If you have any specific item please provide the details and I shall be able to help you further.
Yet another point of caution Please remember that a radiographically sounf casting NEED NOT be hydraulically sound.Please exercise this caution.
Dr Arun Rao [sig][/sig]
Yet another point of caution Please remember that a radiographically sounf casting NEED NOT be hydraulically sound.Please exercise this caution.
Dr Arun Rao [sig][/sig]
- Status
Similar threads
- Question
