Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rack and pinion regeneration position

  • Thread starter Thread starter daveyk_belgium
  • Start date Start date
D

daveyk_belgium

Guest
I have made an assemblyof a rack and pinion. I have added a servo to the pinion, and can also drag the rack. I can run my analysis okay
 
Good news, a slider actually does have 2 jont axis settings, I swear. One translation and one rotation. When selecting the joint right click and you can toggle between the 2 "joints" unless you are in 2001.














http://www.rmeng.com
 
You must log in or register to reply here.

Similar threads

P
Self Weight and Displacement
Replies
0
Views
7K
Panayotis_A
P
A
Pro/Mechanica Material Assignment and Meshing for Assemblies
Replies
0
Views
6K
AMega
A
VRUGRU
  • Locked
  • Question Question
In Simulate, extracting nodal resultant forces and displacements from a global model
Replies
0
Views
228
VRUGRU
VRUGRU
E
...moments and angular constraints not enabled?
Replies
1
Views
3K
anwyl
A
B
How to create Rigid links using Center of gravity and Moments of Interia in Ansys WB?
Replies
0
Views
4K
Bruce321
B

Part and Inventory Search

Sponsor

Back
Top