Arash Nasiri
Petroleum
Dear all
-Can ANSYS model the cement integrity during the curing (we need to understand how the stresses are changing and what type of forces are excreting on the casing during the curing)
-What properties should be assigned to the interface (between casing and cement/ and between the formation and cementing)
tnx
-Can ANSYS model the cement integrity during the curing (we need to understand how the stresses are changing and what type of forces are excreting on the casing during the curing)
-What properties should be assigned to the interface (between casing and cement/ and between the formation and cementing)
tnx