question on ABS piping 1

[jorgefherrero]

I am working on the upgrade of a water treatment plant, where piping is made in ABS. We have valves with spigots with an outer diameter of 73.1 mm, which corresponds to 2 1/2" ANSI pipe. Do you know of a supplier of fittings and adaptors for ABS piping in ANSI Standard?

Regards

 

[stanier]

ABS to AS 3518 is available from Tyco (Eurapipe) in Australia.
This is the ABS used in Europe, Middle East and Asia. It may be different to the grades used in the USA.

http://www.tycoflowcontrol.com.au/tycowater/plastic_pipeline_systems/Overview/plastic_products