Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Quench Tank Sizing Methods For Relief Systems

Status
Not open for further replies.
RJB32482

RJB32482

Chemical
Joined
Jan 19, 2005
Messages
271
Location
US
Could someone reference me to any articles or books on Quench Tank design for safety relief systems. I saw on the internet that one of the CCPS books had some information on this, but I can not find the article which referenced it. Anyone know what CCPS book I'm talking about?

Thanks.
 
Sort by date Sort by votes
"Guidelines for Pressure Relief and Effluent Handling Systems" published in 1998
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

C26M13
  • Locked
  • Question Question
PSV Sizing Calculation (Swagelok Relief Valve)
Replies
17
Views
12K
C26M13
C26M13
D
  • Question Question
Medium for calculation of PSV relief rate
Replies
8
Views
13K
The Obturator
The Obturator
sentrifice
  • Locked
  • Question Question
Relief load calculation
Replies
7
Views
4K
LittleInch
LittleInch
D
  • Question Question
PSV sizing acc. to IGC
Replies
4
Views
7K
Snickster
Snickster
kokerkov
  • Question Question
What is "Free length" of springs in safety relief vavles??
Replies
9
Views
10K
kokerkov
kokerkov

Part and Inventory Search

Sponsor

Back
Top