Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Qualification of WPS - small diameter

Status
Not open for further replies.
Jeldon

Jeldon

Chemical
Joined
May 20, 2013
Messages
25
Location
BR
Hello friends!

Help me in the following issue.

What is the size of the test piece for me to judge a WPS for diameters from 1'' to 4'' thick and 1/8'' to 1/2'', welding position 2F and 4F?

How much testing (NDT and mechanical)?

thank you
 
Sort by date Sort by votes
Sorry, welding position 2G e 4G.

Thanks
 
Upvote 0 Downvote
Step 1: Get a copy of the relevant welding standard.

Best regards - Al
 
Upvote 0 Downvote
What is the applicable welding code for your job?
And please be more clear in explaining what exactly you want to know.

Birken
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

naquib
  • Locked
  • Question Question
WPS Qualification AWS D1.1 2020, Box to Box WPS Sample
Replies
0
Views
2K
naquib
naquib
Karik87
  • Locked
  • Question Question
Diameter qualified range - EEMUA 158
Replies
0
Views
1K
Karik87
Karik87
deepu78
  • Locked
  • Question Question
WPS & PQR approval
Replies
2
Views
1K
david339933
david339933
Marshall Clark
  • Locked
  • Question Question
Prequalified WPS for 3G/4G
Replies
0
Views
866
Marshall Clark
Marshall Clark
nabeel3
  • Locked
  • Question Question
Multiple Electrodes in a WPS
Replies
1
Views
915
gtaw
gtaw

Part and Inventory Search

Sponsor

Back
Top