Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pump Station Costs
- Thread starter dolly63
- Start date
PUMPDESIGNER
Mechanical
Capacity ranges?
Pressure ranges?
What service, transfer, pressurization, boost?
General area, US, overseas?
Manufactured complete, or built on site? PUMPDESIGNER
Pressure ranges?
What service, transfer, pressurization, boost?
General area, US, overseas?
Manufactured complete, or built on site? PUMPDESIGNER
- Thread starter
- #3
The pump station being referred to has the following details:
Capacity range (40 to 55 cfs)
Pressure range (140 to 180 feet)
Use (irrigation pumping)
General Area (U.S. in Montana State)
Built on site or manufactured (whichever is the most suitable)
Capacity range (40 to 55 cfs)
Pressure range (140 to 180 feet)
Use (irrigation pumping)
General Area (U.S. in Montana State)
Built on site or manufactured (whichever is the most suitable)
PUMPDESIGNER
Mechanical
Hire an engineer with plenty of experience in that type of station. Describe what you want and the engineer might be able to give some estimates, or more likely the engineer works up a very basic description and sends it to some qualified contractors who would provide budget estimates. PUMPDESIGNER
- Status
Similar threads
