Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PUMP SELECTION

Status
Not open for further replies.
dkm0038

dkm0038

Mechanical
Joined
Feb 23, 2009
Messages
53
Location
US
I would like an opinion for what type of pump would be best for sae 10 hydraulic oil at 120 F pumping at no more than 5 gallons per minute.

Thank you
 
Sort by date Sort by votes
Is this to transfer the oil or circulate in a system with actuator load(s)?

Ted
 
Upvote 0 Downvote
Its to test heat transfer and pressure drop in heat exchangers. I am going to have a tank that holds the oil and then pump it through the heat exchanger to another holding tank.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Torque100Nm
  • Locked
  • Question Question
PUMP SELECTION
Replies
2
Views
533
Artisi
A
giuman
  • Question Question
Pump modifications
Replies
5
Views
11K
TugboatEng
TugboatEng
Ahmed Khan
  • Locked
  • Question Question
Pump selection
Replies
4
Views
537
mk3223
mk3223
J
  • Question Question
API PLAN SELECTION
Replies
0
Views
3K
jr.keng
J
BasakAbhishek
  • Question Question
Pump volute nomenclature
Replies
2
Views
3K
Artisi
A

Part and Inventory Search

Sponsor

Back
Top