Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pulling datum targets in from model to draft

Status
Not open for further replies.
KENAT

KENAT

Mechanical
Joined
Jun 12, 2006
Messages
18,387
Location
US
I've put my datum targets in sketches in the relevant orientation in the model.

I do retrieve dimensions in the draft to pull them in. Some of them come in OK but several of them came through in the wrong place.

Any ideas?

V19

KENAT, probably the least qualified checker you'll ever meet...
 
Status
Not open for further replies.

Similar threads

NirVidP
  • Locked
  • Question Question
How to 'Create Part In Place' using vba?
Replies
0
Views
983
NirVidP
NirVidP
J
  • Locked
  • Question Question
VBA to Pull Total Surface Area and Volume for a Part of an Assembly?
Replies
0
Views
1K
jdconnel
J
jcpalekar
  • Locked
  • Question Question
How to handle occurrence properties of solid edge through excel sheet?
Replies
0
Views
1K
jcpalekar
jcpalekar
NZMark
  • Locked
  • Question Question
Dimension scaling of drawing objects in Draft
Replies
3
Views
2K
kjoiner
kjoiner
Vikas4auto2019
  • Locked
  • Question Question
How to add bulk components in to the assembly.
Replies
0
Views
945
Vikas4auto2019
Vikas4auto2019

Part and Inventory Search

Sponsor

Back
Top