PSOLID "Integration Network"

[SAITAETGrad]

What is an "integration network" and specifically how is this implemented with FEMAP? Can't find much in any of the FEMAP/NX/NEi documentation.

This information is not translated for the NASTRANs (per FEMAP documentation) which I use. Some suggestion this is related to contact analysis? I'd just like to understand what this is about in a general sense.

 

[Naffoussi]

Under Femap / Help / Nx Nastran / Quick Reference Guide / Page 1979 (PSOLID card)

See Remark 9, 10, 11 and 12. You will find answers which corresponds to the possibility you have under Femap solid property.
Integration network (0...3) = You can enter 0 or 1 or 2 or 3 for integration network.

Regards,

Seif Eddine Naffoussi, Stress Engineer

http://www.Innovamech.com

33650 Martillac û France