Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Protective coatings for Optical Applications

Status
Not open for further replies.
ganpule

ganpule

Chemical
Joined
Jul 5, 2001
Messages
3
Location
US

I am looking for protective coatings for LCD applications. These coatings have to be able to withstand the following two post processing steps: (1) Sputter overcoat of SiO2 and ITO where temperatures reach as high as 300 C IN VACUUM for about 5 minutes, (2) ITO etching step where the coating gets exposed to 30% HCl for about 1 minute.

Any help would be highly appreciated.

Thanks,
 
Status
Not open for further replies.

Similar threads

T
  • Locked
  • Question Question
Calculate required amount of paint for mechanical spring
Replies
5
Views
3K
Compositepro
Compositepro
YungPlantEng
  • Locked
  • Question Question
Common use cases for corrosion wax tape?
Replies
3
Views
1K
TugboatEng
TugboatEng
wm2k
  • Locked
  • Question Question
High emissivity hydrophilic coatings
Replies
1
Views
417
IRstuff
IRstuff
Rdpere
  • Locked
  • Question Question
What kind of coatings are there for the copper products?
Replies
8
Views
746
Rdpere
Rdpere
BrianE22
  • Locked
  • Question Question
Protective covering on powder coated plates
Replies
0
Views
271
BrianE22
BrianE22

Part and Inventory Search

Sponsor

Back
Top