Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Projected area Af

Status
Not open for further replies.
dgkhan

dgkhan

Structural
Jul 30, 2007
322
AS per ASCE Af is the projected area. For cylinder with diameter D will it be D x height of cylinder OR
Pi x D x height of cylinder
 
Replies continue below

Recommended for you

Sort by date Sort by votes
pi*D will give the surface area (excluding the top and bottom), not the horizontal projection.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

K
  • Question
CSI Bridge model - area model
Replies
0
Views
3K
kami125
K
Boiler106
  • Question
Effective Wind Area - Stud Wall with Parapet
Replies
9
Views
6K
M.IDR
M.IDR
Bombadilla
  • Locked
  • Question
Partially loaded area without bursting reinforcement
Replies
0
Views
830
Bombadilla
Bombadilla
Pretty Girl
  • Locked
  • Question
Column Design - concrete - Biaxial bending - Why the r/f area is not deducted from concrete area 3
Replies
9
Views
3K
Pretty Girl
Pretty Girl
skeletron
  • Locked
  • Question
Effective Net Area - Shear Lag - CSA S16 interpretation
Replies
13
Views
2K
skeletron
skeletron

Part and Inventory Search

Sponsor

Back
Top Bottom