Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Product Response Modification Factor

Status
Not open for further replies.
WARose

WARose

Structural
Joined
Mar 17, 2011
Messages
5,594
Location
US
I had a client ask me today if there is a codified procedure (i.e. by ASCE, ASTM, etc) to determine a response modification factor (i.e. as per the seismic part of ASCE7) for a product they make.

Is there one? It rings vague bell for me somewhere. Thanks.
 
Status
Not open for further replies.

Similar threads

SE2321
  • Locked
  • Question Question
Response Modification factor used by MBS software
Replies
2
Views
2K
DanKile
DanKile
HDStructural
  • Locked
  • Question Question
PEMB Splice Modification
Replies
3
Views
1K
HDStructural
HDStructural
Keystation
  • Locked
  • Question Question
U factor confusions
Replies
2
Views
2K
Keystation
Keystation
Nayan67
  • Locked
  • Question Question
Column bents - Response modification factor
Replies
3
Views
433
Nayan67
Nayan67
ResidentialStructGuy
  • Question Question
Roof live load wood duration factor
Replies
12
Views
1K
jhnblgr
jhnblgr

Part and Inventory Search

Sponsor

Back
Top