Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Produce Copper Shavings and/or fines?

Status
Not open for further replies.
johnhog

johnhog

Mining
Dec 19, 2002
2
I need to know how to produce copper shavings which appear to be very small diameter wires and / or chips that are very short in length. I need to produce about 40000#'s monthly. This is not a powdered metal application.
 
Status
Not open for further replies.

Similar threads

enginesrus
  • Locked
  • Question
What brass or bronze for water couplings?
Replies
9
Views
6K
Brooke William
B
APIpipeWholesaler
  • Locked
  • Question
12.5 % + or - WALL TOLERANCE ON CARBON STEEL PIPE
Replies
3
Views
847
LittleInch
LittleInch
Johnwoo1991
  • Locked
  • Question
A182 F9 and F91 metallurgical differences 1
Replies
6
Views
3K
EdStainless
EdStainless
Johnwoo1991
  • Locked
  • Question
F9 and F91 steel for low temp
Replies
1
Views
1K
EdStainless
EdStainless
dogbural
  • Locked
  • Question
HT300 casting material - normalisation and tempering
Replies
2
Views
652
MFAMET
MFAMET

Part and Inventory Search

Sponsor

Back
Top Bottom