Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem with mass flow rate to introduce velocity in thermal analysis

Status
Not open for further replies.
aaltuna

aaltuna

Mechanical
Joined
Jun 14, 2016
Messages
30
Location
ES
Dear,

I am working with thermal analysis and I would like to introduce velocity to the tube.
I am introducing the movement by mass flow rate, defining INPUT and OUTPUT node set. But, I have problem with the convergence.

Any help it would be appreciated.

Regards,

Ane
 
 http://files.engineering.com/getfile.aspx?folder=f0ceda62-d2d5-45ca-84bf-5334f9d8c359&file=Job-12tempMFb.inp
Status
Not open for further replies.

Similar threads

B
  • Question Question
Abaqus natural frequency error with a tip mass, values not matching
Replies
11
Views
14K
boredbot
B
R
  • Locked
Abaqus: transferring solution field from one instance to another between steps within same analysis.
Replies
2
Views
4K
Ron_ron
R
jorge0894
  • Locked
  • Question Question
Restart analysis in Abaqus Explicit Error
Replies
3
Views
3K
FEA way
FEA way
S
  • Locked
  • Question Question
How to Properly Implement Viscosity in SPH Using ABAQUS Explicit Analysis?
Replies
1
Views
2K
FEA way
FEA way
Pam Crash
  • Solved
Fluid filled structure: Implicit transient *Dynamic analysis possible with ABaqus-Standard
Replies
6
Views
7K
jball1
jball1

Part and Inventory Search

Sponsor

Back
Top