Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem to installing proe on winxp

Status
Not open for further replies.

triko

Mechanical
Joined
Jan 14, 2005
Messages
3
Location
IT
Hi all.
I have some problems installing proe.
I have a network card integrated on the motherboard but when i launch the setup installation of proe, in the main window it appears that it is unable to detect the network card.

thank to who could help me.
hi

 
What version of Pro?

"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
 
i first thank you for your reply. the version of proe is 2001. if you have some useful information i thank you. hi
 
Are you running FlexLM locally or from a server?

Is your HD formated to NTFS?



"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
 
I hade the same problem. Do you have more then on network card?
If go into the regediter and set the number name on the card you are using to lowest value.
HKEY_LOCAL_MACHINES\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\NetworkCards

If that don’t work tray to disable media sense.
 
This is how I was able to install the software on the personal computer:
Shutdown firewall software, do not install Licensed Server (ignore FlexLM warning), and then install. The program doesn't work with firewall on or while you are connected to the internet.
 
Hi
Wildfire does not run on xp as on nt !

If search path is used the responce increase from typical 4 minutes to 2 hours.

POBang
 
To sg20: i ve read tour post just now. thank you i ve already tried to disactivate firewall but proe doesnt run. thank you.

 
Install a virtual network card of "microsoft loopback adapter" kind in your pc.
control block--add hardware--next-yes,the hardware has been contected,next--go to the bottom,click the words"add new hardware equiment",next--install hardware i choose from the
table,next--network adapter,next--choose the microsoft loopback adapter.next--ok.that is all.
when installing wildfire,enable the virtual network card.
that will be ok.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top