Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem in NX11 with 3D "PMI SECTION VIEW" in 2D drawing

Status
Not open for further replies.
YannB

YannB

Automotive
Joined
Dec 14, 2016
Messages
2
Location
FR
Hello

I have a problem, in NX11, when i create 2D view from "SECTION VIEW" 3d PMI.

Hatching no longer appears on 2D view......



PMI SECTION VIEW type "cut" --> SECTION A
2016-12-14_11h55_43_fjwt9d.jpg


PMI SECTION VIEW type "Plane-Only" --> SECTION B
2016-12-14_11h57_13_olp6jk.jpg



Result in drawing 2D
2016-12-14_11h59_58_zdku9h.jpg


Why no hatching in SECTION B 2d view ???

 
Status
Not open for further replies.

Similar threads

SDETERS
  • Locked
  • Question Question
3D PMI and MBD vs 2D Drawings
Replies
0
Views
693
SDETERS
SDETERS
CAD2015
  • Locked
  • Question Question
Detail View in drawing - Modifications
Replies
2
Views
2K
CAD2015
CAD2015
C
  • Locked
  • Question Question
Hide features in drawing view
Replies
5
Views
4K
Rob_N
Rob_N
D
  • Question Question
Has any one used several thousand components in the Hidden components in drawing view application?
Replies
4
Views
10K
DaveFig
D
KKKing
  • Question Question
How to Chart Dim when using PMI dim in Sheet metal
Replies
0
Views
5K
KKKing
KKKing

Part and Inventory Search

Sponsor

Back
Top