Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

problem during linking subroutines

Status
Not open for further replies.
hamadadf

hamadadf

Civil/Environmental
Joined
Mar 3, 2006
Messages
62
Location
CA
I am trying to submit a job, and i always get this message problem during linking Abaqus-standard user subroutines.
Any clue how can i overcome that?
 
Sort by date Sort by votes
Make sure you have set up the Fortran environment (paths etc) as per the docs. There is a verification routine that you can run to test this... Try: abaqus verify -user_std
 
Upvote 0 Downvote
It works with other models but not this one. Thats why i don't think it is a problem in linking between abaqus and fortran
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

nilesh_dot
  • Locked
  • Question Question
Problem during linking - Abaqus/Standard User Subroutines
Replies
2
Views
1K
nilesh_dot
nilesh_dot
vitoram14
  • Locked
  • Question Question
Linking Problem ABAQUS FORTRAN
Replies
1
Views
1K
FEA way
FEA way
Hossein3ds
  • Question Question
Error during Thermo-mechanical Analysis
Replies
1
Views
3K
FEA way
FEA way
E
  • Locked
  • Question Question
Mesh Problem
Replies
1
Views
2K
FEA way
FEA way
Adil Memet
  • Question Question
Abaqus Metallurgical phase transformations simulation example running problem
Replies
6
Views
7K
Adil Memet
Adil Memet

Part and Inventory Search

Sponsor

Back
Top