Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pro/M analysis

  • Thread starter Thread starter chicka
  • Start date Start date
Status
Not open for further replies.
C

chicka

Guest
I am doing a stress analysis in Pro/M and want to find the stresses only at 4 particular points. How do I assign these points????
 
You need to assign measures to those points.
 
crate datum points at reqd places and use dynamic query
 
Status
Not open for further replies.

Similar threads

jasongBSME
  • Locked
  • Question Question
Converting from Pro/Mechanica to Creo Simulate
Replies
0
Views
800
jasongBSME
jasongBSME
S
Dynamic Analysis of Theo Jansen walking mechanism
Replies
0
Views
37K
Sai Rakesh
S
T
Pro mechanica - create a mesh from imported points (nodes)
Replies
1
Views
24K
Twig Studio
T
woofer54
  • Locked
  • Question Question
Pro E Wildfire 5.0 Mechanism Flexible Simulation
Replies
0
Views
705
woofer54
woofer54
kdaenerys
  • Locked
  • Question Question
Drive Creo Simulate through Microsoft Excel
Replies
1
Views
1K
kayla_engineer
kayla_engineer

Part and Inventory Search

Sponsor

Back
Top