Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pro/INTRALINK Change Status to Read only

  • Thread starter Thread starter ralexy
  • Start date Start date
Status
Not open for further replies.
R

ralexy

Guest
Is any Pro/INTRALINK option what I can set to Pro/INTRALINK no changing Workspace Status when is object Updating?
Edited by: ralexy
 
If you don't want for someone to make changes to a part while you are working on it then you need to select the part in commonspace and right_click and change status/ locked. And then you are the only person that can modify and check-in the part.


PS: Remember to unlock the part once you are done.
smiley2.gif
 
No, no, no,


I want to be possible modify no my objects. But only for my help
 
I don't understand very well what to you need to do but:


If you want to set some of you objects to be read_only, select them in workspace, right click and then "change_status" read_only.
 
You can change settings to default set read only i WSwhen you check out from cs.


Try to look at preferences - check out. Perhaps you will find whet you need here.
 
If you've defined authorization on folders in CS, open Preferences and click Checkout, then in Automatic Status Setting area choose Without Checkin Authorization option and set it to Read Only. If you don't have checkin authorization on folder in CS, all the checked-out parts in that folder will have the Read-Only status.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top