Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pro/Engineer Data Migration to PDM
- Thread starter jayanthi
- Start date
The beginning portion of a Pro/E file is text data that has all of the parameters in it. How much digging do you want to do?
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
- Thread starter
- #3
Loosli,
The scenario is...I have created few parameters through Setup-->Parameters-->Create and assigned 'values' to them. These values would help me to identify the part and its BOM structure.
I need to know, how can I list these values along with the parameters, without opening the part/assembly/drawing in Pro/E.
Thank you,
Jayanthi
The scenario is...I have created few parameters through Setup-->Parameters-->Create and assigned 'values' to them. These values would help me to identify the part and its BOM structure.
I need to know, how can I list these values along with the parameters, without opening the part/assembly/drawing in Pro/E.
Thank you,
Jayanthi
Did you designate the parameter that you created? If it is designated then the parameter name and value will show up in the beginning of the Pro/E file. You can open the file with a text editor to look for this value or write a program to search for this parameter within multiple files.
- Status
Similar threads
- Locked
- Helpful tip
- Solved
- Question