pro-e wildfire 2 queries

[hfernandes29]

hi could any one let me know how to use the sweep taB IN PRO-E . i HAVE JUST STARTED learning pro-e .may be a simple example may help.

 

[vlad1979]

Do you mean the sweep under the insert /sweep ?


If this is want you asked then sweep makes exactly what it means: it sweeps a section along a trajectory.

 

[SRINIVASANIYER1]

The best way and the right way to learnis from the help files...


At the top of the icons, look for the "?" marked icon, click on it and then click on any command. you will get a context sensitive help.

 

[SRINIVASANIYER1]

Further go to help and look for proe 2001 help topic collection. This is a good collection and is almost like a tutorial.

 

[hfernandes29]

Hi srine,





Thanks a lot srini it was quiet helpful. Another small favour do you know any site


where in I could find pro-e piping tutorials specifically videos for free on the internet.

 

[SRINIVASANIYER1]

http://www.youtube.com/group/proengineer


http://www.youtube.com/results?search_query=PROE


The both the sites are useful.


Further, for a beginer (I presume), click on the ARTICLES icon at the top of this page. A study of these well written articles will give you a good insight on the methodology of Parametric Design.