Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

prima platino 1530 with a dc035 rofin slab laser please help

Status
Not open for further replies.
hubbard07

hubbard07

Industrial
Joined
Apr 21, 2011
Messages
1
Location
US
just received a platino laser from sister company in spain have no settings for cutting mild steel or stainless anyone using this style machine and laser that could help with some settings would be appreciated.(gas pressure, frequency, speed, power etc)
 
Sort by date Sort by votes
Have you contacted Rofin's application group? Back when I worked for them in the early to mid 90's, they had some pretty smart Application Engineers in that group. The DC 020 came out just after I left them and I was a welder guy so I cannot help beyond that. Sorry.

Scott

I really am a good egg, I'm just a little scrambled!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Question Question
how to laser cut a cylinder
Replies
0
Views
5K
Bluces
B
M
  • Locked
  • Question Question
AMADA LC1212 ALPHA iii LASER MACHINE /HELP!
Replies
3
Views
3K
Well Oiled Machine
Well Oiled Machine
B
  • Question Question
Will there be problems with the cutting section if the laser cutting speed is too fast or too slow?
Replies
3
Views
447
IRstuff
IRstuff
D
  • Question Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
RPosty
  • Question Question
How to choose correct Beam Splitter for 50/50 output with sealed beam co2 laser? S vs P pole
Replies
3
Views
7K
Bluces
B

Part and Inventory Search

Sponsor

Back
Top