Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Predefined field in Load case+

Status
Not open for further replies.
n3l3

n3l3

Mechanical
Joined
Dec 28, 2010
Messages
69
Location
ES
Hi all,

I was trying to combine some loads yn the correspondent load cases. One of these loads is actually no load, is a prestressing, made by means of a predefined, field.

There is a way to input/exclude it from the loadcase?

thanks
 
Status
Not open for further replies.

Similar threads

T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
427
SWComposites
SWComposites
S
  • Locked
  • Question Question
Distributed load on steel grating
Replies
1
Views
1K
Stick.
Stick.
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
5K
AhmedEltaweel
AhmedEltaweel
mrmyagi
  • Locked
  • Question Question
EN 13445-3 C.7.5 Limitation of primary stresses in case of tri-axial state of stress
Replies
1
Views
343
TGS4
TGS4

Part and Inventory Search

Sponsor

Back
Top