Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRC CO2 LASER

Status
Not open for further replies.
aws04

aws04

Industrial
Joined
May 19, 2004
Messages
34
Location
NZ
Does anyone have some advise with regards to PRC co2 lasers in general compared to Bistronic & Prima lasers.
We wanted 3Kw but were advised to stay away from the PRC 3000kw ( agent said the 3kw PRC was souped up 2.5kw & not very reliable). Now there is a new 3.3kw PRC and they are saying this one is OK because of a digital power supply.

steve.c
 
Status
Not open for further replies.

Similar threads

RPosty
  • Question Question
How to choose correct Beam Splitter for 50/50 output with sealed beam co2 laser? S vs P pole
Replies
3
Views
7K
Bluces
B
B
  • Question Question
how to laser cut a cylinder
Replies
0
Views
5K
Bluces
B
D
  • Question Question
Amada lc2415 laser panel won’t power on
Replies
2
Views
3K
Bluces
B
M
  • Locked
  • Question Question
AMADA LC1212 ALPHA iii LASER MACHINE /HELP!
Replies
3
Views
3K
Well Oiled Machine
Well Oiled Machine
S
  • Locked
  • Question Question
LD1 Alarm Amada 6kW Fiber Laser
Replies
0
Views
1K
SiemensN00b
S

Part and Inventory Search

Sponsor

Back
Top