Pouring concrete on a sloped surface

[adsmitty]

I have an existing conveyor gallery structure at an 18 degree slope. I need to replace the floor with a corrugated, 1 1/2" composite deck with light weight concrete (f'c = 5000psi). The corrugations of the deck are perpendicular to the axis of the conveyor.

Does anyone know if a contractor could pour this type of concrete floor at such a steep angle? Any references would be appreciated.

Thanks,
Adam-

 

[SlideRuleEra]

Any qualified concrete contractor should be able to place concrete on an 18 degree slope. This is not particularly steep.

http://www.SlideRuleEra.net

http://www.VacuumTubeEra.net

 

[bb29510]

we have done up to 45 degrees, it takes talent and a very dry slump, like 2 inch slump, cannot vibrate. its mainly dry packing. 18 would be easy