Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Postprocessor TCL-command "MOM_force once..."

Status
Not open for further replies.
boomstra

boomstra

Automotive
Joined
Apr 25, 2005
Messages
14
Location
GB
I'm building a postprocessor with postbuilder.
What is the function of the command "MOM_force once...".
What does it do and why?
 
Sort by date Sort by votes
It is used to force the address, like, G_motion, X Y Z fourth_axis and fifth_fith

you can get more details of MOM_force, once and always from MOM built in commands
 
Upvote 0 Downvote
When would you like to force an adress?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

N
  • Question Question
Through Curves command
Replies
8
Views
1K
Toost
Toost
MANox
  • Locked
  • Question Question
Change tabs bar posiotion to "centered"
Replies
2
Views
468
MANox
MANox
Asieros
  • Locked
  • Question Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
728
Asieros
Asieros
N
  • Question Question
Through curves command // Blade help
Replies
0
Views
372
Nutria360
N
Anton Liubimov
  • Locked
  • Question Question
NxOpen, How to programmatically open a dialog box "Extrude"
Replies
2
Views
835
Anton Liubimov
Anton Liubimov

Part and Inventory Search

Sponsor

Back
Top