Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Post Processor vizualization and "Identify result" showing different result

Status
Not open for further replies.
simrii

simrii

Mechanical
Joined
Mar 21, 2013
Messages
1
Location
NO
Hello!

I have created a axisymmetric model, with cquad8 elements as shown on the picture. The weird thing is that when i want to know the value on a node, using the "identify result" feature, it will not give me the same answer as the vizualization. Anyone who knows whats wrong? And which result that I shoud count on? It would be much appreciated.

Two pictures of the case is attached

Sincerely Simon
 
Status
Not open for further replies.

Similar threads

DDerek
  • Locked
  • Question Question
How to make "Balloon" Result in only the number for the callout
Replies
3
Views
618
SDETERS
SDETERS
S
  • Question Question
Define POST-Actions for Loading from different options
Replies
0
Views
1K
sbjw
S
MANox
  • Locked
  • Question Question
Change tabs bar posiotion to "centered"
Replies
2
Views
462
MANox
MANox
dbharness
  • Question Question
linked parent not showing in assembly
Replies
2
Views
10K
moog3
moog3
Asieros
  • Locked
  • Question Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
722
Asieros
Asieros

Part and Inventory Search

Sponsor

Back
Top