Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Porous media definition

Status
Not open for further replies.

bramvangestel

Automotive
Joined
Aug 19, 2008
Messages
7
Location
BE
Hello all,

I am comparing StarCCM+ vs Fluent at the moment. Now when i need to define a porous media with the 2 main values, inertial resistance and viscous resistance both software packages use very different units:

inertial resistance FLUENT:1/m StarCCM:kg/m^4
viscous resistance FLUENT:1/m^2 StarCCM: kg/(m^3.s)

I have never encountered these units from StarCCM before and have no idea how to convert FLUENT values into these.
Someone an idea how to convert?
 
Are you sure about the Fluent viscous resistance term?

At first glance, I would've said you divide the StarCCM values by the fluid density to get the Fluent inputs. But that doesn't seem to work for the viscous resistance...might work if you divide that term by the fluid dynamic viscosity (mu) for the viscous resistance...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top