Can anyone point me to any good references for designing urethane springs or know of any applicable posts in other forums? I've found information in catalogs such as that provided by Sorbothane, but these seem to be geared to helping one decide what might work from their catalog and not how to design a spring from scratch. I'm after a more detailed design guide - like the equivalent of Wahl's handbook available through SMI.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
(Poly)urethane spring design 1
- Thread starter prdave00
- Start date
- Status
Similar threads
- Locked
- Question
