jimmy2times
Electrical
can pole slipping (due to loss of excitation) lead to failure in diesel gen set?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
pole slipping synchronous
- Thread starter jimmy2times
- Start date
- Status
catserveng
Electrical
Yes, results of a pole slip are similar to an out of phase close, at least in the size units I am familiar with.
Have found damaged flex plates and torsional couplings, a couple of instances of damaged crankshafts, and several sets of blown diodes and surge suppressors, to name a few encountered.
Mike L.
Have found damaged flex plates and torsional couplings, a couple of instances of damaged crankshafts, and several sets of blown diodes and surge suppressors, to name a few encountered.
Mike L.
- Thread starter
- #3
jimmy2times
Electrical
thanks for that info Mike,
yes I subsequently found a reference after making the above post,
yes I subsequently found a reference after making the above post,
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question