Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Plug Weld Diameter

Status
Not open for further replies.
BodyBagger

BodyBagger

Mechanical
Joined
Feb 23, 2007
Messages
459
Location
US
Hello all,

1st post in this forum.

I was wondering if there is a standard or similar that determines the hole diamter for doing plug welds. For example, if I need to plug weld two 12awg plates together what dimater should be drilled in the top plate?

Thanks for any input.
BB
 
Status
Not open for further replies.

Similar threads

MToomey
  • Question Question
Weld Callout Leader Direction
Replies
5
Views
8K
MToomey
MToomey
sdra2
  • Question Question
Weld assessment for lifting beam
Replies
0
Views
3K
sdra2
sdra2
Cormet
  • Question Question
Dissimilar Metal Weld Qualification
Replies
5
Views
2K
David3399
D
DavidLove
  • Question Question
Checking inclusion content of weld filler material
Replies
3
Views
10K
EdStainless
EdStainless
olr
  • Locked
  • Question Question
bevel weld detailing
Replies
4
Views
5K
gtaw
gtaw

Part and Inventory Search

Sponsor

Back
Top