Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

pls help

  • Thread starter Thread starter -
  • Start date Start date
Status
Not open for further replies.

Guest
Hi
Pls help me to calculate the pump operation weight at four corner of pump base.Pump head is 287 feet, and pump+motor weight is 721kg.Discharge pipe size is 150mm .

thks
akn
 
and your pumping what?? The weight of the fluid you are pumping is required.
 
This kind of sounds like an academic problem to me. Why do you need to know the operating weight of your pump and why is this a question that you should be posting on Eng-Tips as opposed to asking the pump manufacturer?

Tim
 
Contact the pump company - foundation loads require all the pump curve info, weights, HP, and discharge position Keep the wheels on the ground
Bob
showshine@aol.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top