Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Plotting in color
- Thread starter Coolboy55
- Start date
- Thread starter
- #2
Just a little point of forum etiquette.
One should never in a forum say "..never mind I figured it out.." as somebody else may have a similar problem and has not yet figured it out and your not letting them in on how you solved it... epecially when you have it posted for quite a while then reply to your own post never mind..
One should never in a forum say "..never mind I figured it out.." as somebody else may have a similar problem and has not yet figured it out and your not letting them in on how you solved it... epecially when you have it posted for quite a while then reply to your own post never mind..
- Thread starter
- #4
cad101,
Good point, thank you.
Well, it turns out that I had to change the plotter driver. The one I ended up using successfully to print in color was pscriptc.plt, although there were a few that seemed to work - some with better resolution and colors than others.
CB55
Good point, thank you.
Well, it turns out that I had to change the plotter driver. The one I ended up using successfully to print in color was pscriptc.plt, although there were a few that seemed to work - some with better resolution and colors than others.
CB55
- Status
Similar threads
- Locked
- Question
- Locked
- Question