Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Ron247 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

please any one help me to create a

Status
Not open for further replies.
rabi1982

rabi1982

Mechanical
Oct 27, 2012
5
please any one help me to create a delamination in a composite plate.......
 
Replies continue below

Recommended for you

Sort by date Sort by votes
There are several examples in the help file. You should start there.

Han primo incensus
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question
Abaqus, using nonlinear spring to create tensionless soil.
Replies
1
Views
935
FEA way
FEA way
G
  • Locked
  • Question
How to create this feature in abaqus part modelling?
Replies
3
Views
1K
FEA way
FEA way
A
Abaqus help
Replies
2
Views
8K
ArijitME
A
R
Abaqus: transferring solution field from one instance to another between steps within same analysis.
Replies
2
Views
4K
Ron_ron
R
P
  • Locked
Information about Mapping Stress from one simulation result to another geometry ( which is a trimmed version of previous geometry)
Replies
2
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom