Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Plasticity model

Status
Not open for further replies.
Garlik

Garlik

Mechanical
Joined
Dec 5, 2008
Messages
17
Location
CH
I should have to make a non-linear study (plasticity) of one shaft with ANSYS. This shaft is put under torsion stresses. I have to study its damage and its limit. Which type of study you recommend to me?
 
Sort by date Sort by votes
Garlik,



This question sounds too much like, what do I do? You ahven't shown that you've tried anything or looked for any information on your own. Chances are no one is going to really answer a question like that.

Are you sure you must account for plasticity?
Do you have the material property data for the shaf
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
vickyiamlucky
  • Locked
  • Question Question
Ansys Symmetry model to full model cut boundary dispacemnt or force bc
Replies
0
Views
728
vickyiamlucky
vickyiamlucky
Jeremy1989
  • Locked
  • Question Question
Difference in Von Mises Results Between Beam Model and 3D Model
Replies
2
Views
561
Stick.
Stick.
RMANERA
  • Locked
  • Question Question
J2 flow theory of plasticity in Ansys Apdl?
Replies
0
Views
170
RMANERA
RMANERA
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top