Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Placing SIM results in original assembly

Status
Not open for further replies.
Michel1978

Michel1978

Mechanical
Joined
Nov 12, 2008
Messages
125
Location
NL
I know it is possible to place the results of a simulation in the original assembly. But how? I believe it has something to do with STL files.

Michel

I use NX8.5
HP Z600 Intel Xeon E5520 2.27GHz Dual
Quadro FX 3800 5GB
9GB Memory
Windows 7, 64-bit

Groeten, Michel

A leading Dutch institute in atomic and subatomic physics
 
Status
Not open for further replies.

Similar threads

E
  • Question Question
Hide line lables in assembly
Replies
2
Views
6K
Emer4ld
E
H
  • Question Question
NX Flow: Results generator error for Tecplot results
Replies
0
Views
2K
Herwig
H
dbharness
  • Question Question
linked parent not showing in assembly
Replies
2
Views
10K
moog3
moog3
CAD2015
  • Locked
  • Question Question
Curves do not show in Assembly.
Replies
4
Views
2K
CAD2015
CAD2015
CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
7K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top