Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Piping Parallelism

Status
Not open for further replies.
jhampton1970

jhampton1970

Mechanical
Joined
Jun 25, 2006
Messages
5
Location
US
Does anyone know where to find an ASME code or another reference concerning piping parallelism? Recently, I have started a career with a new company, which is quite young. Their documentation is still in the growing process. The last company I worked for had a test certificate, which stated 0.40mm per every 100mm of piping OD. Is this a general standard, or just that company's policy?


Regards,
Jason Hampton
-Freedom isn't free!
 
Status
Not open for further replies.

Similar threads

D
  • Question Question
Closed Loop Piping-Vacuum Issue
Replies
10
Views
8K
georgeverghese
georgeverghese
jafary64
  • Question Question
Single Line on Piping
Replies
10
Views
23K
EngrPaper
EngrPaper
K
  • Question Question
Pump piping Layout
Replies
10
Views
3K
goutam_freelance
goutam_freelance
KevinNZ
  • Question Question
GRP Piping Seismic deign
Replies
3
Views
660
KevinNZ
KevinNZ
Ahmed Habashy
  • Question Question
Steam piping
Replies
7
Views
5K
Vikki Yip
V

Part and Inventory Search

Sponsor

Back
Top