Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Piping Data 2
- Thread starter sigma1
- Start date
-
1
- #2
Montemayor
Chemical
Sigma:
NPS - Nominal Pipe Size for Windows is a shareware program from Herne Data Systems Ltd and is an easy to use a database of dimensional, weight and flow information for more than 5,700 sizes of standard and specialty pipes and tubes (from 1/8" to 72" nominal size) in over 35 different materials, including metals, plastics and composites. The data can be displayed in US, Imperial or metric units. NPS for Windows includes a piping calculator to show weight and dimensional data for lengths of pipe in various units. Program defaults are fully user configurable. This program is directed at piping engineers and students. .
CONTACT INFO:
The mailing address is:
Herne Data Systems Ltd.
PO Box 250
Tiverton, ON N0G 2T0
CANADA
Tel: Voice/FAX (519) 366-2732
e-mail: herne@herne.com, or 72060.1153@compuserve.com
WWW:
Or, you can do what I did some years back: sit down and copy the piping tables from either Crane's TP #410 or Cameron's Hydraulic Data.
I hope this information helps you out.
Art Montemayor
Spring, TX
NPS - Nominal Pipe Size for Windows is a shareware program from Herne Data Systems Ltd and is an easy to use a database of dimensional, weight and flow information for more than 5,700 sizes of standard and specialty pipes and tubes (from 1/8" to 72" nominal size) in over 35 different materials, including metals, plastics and composites. The data can be displayed in US, Imperial or metric units. NPS for Windows includes a piping calculator to show weight and dimensional data for lengths of pipe in various units. Program defaults are fully user configurable. This program is directed at piping engineers and students. .
CONTACT INFO:
The mailing address is:
Herne Data Systems Ltd.
PO Box 250
Tiverton, ON N0G 2T0
CANADA
Tel: Voice/FAX (519) 366-2732
e-mail: herne@herne.com, or 72060.1153@compuserve.com
WWW:
Or, you can do what I did some years back: sit down and copy the piping tables from either Crane's TP #410 or Cameron's Hydraulic Data.
I hope this information helps you out.
Art Montemayor
Spring, TX
-
1
- #3
pipingdesigner
Mechanical
Sigma1,
If you go to there are tables and excel files in the tools menu.
pipingdesigner
If you go to there are tables and excel files in the tools menu.
pipingdesigner
- Status
Similar threads
- Question
