Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

pipeline thermal expansion in Ansys

Status
Not open for further replies.
elbow1

elbow1

Coastal
Oct 25, 2004
11
why the thermal expansion results of Ansys is only about half of the analytical results? i apply the body loads to pipe16 element. Anybody meet the same problem? thanks.

 
Status
Not open for further replies.

Similar threads

O
  • Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
X
  • Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
957
xinyu3liu
X
S
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
676
Rabea-19
R
somebodyfromworld
  • Locked
  • Question
ACT extensions for Ansys
Replies
0
Views
897
somebodyfromworld
somebodyfromworld

Part and Inventory Search

Sponsor

Back
Top Bottom