Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pipe welding of S355j2(+ N) with api 5L x60 ?

Status
Not open for further replies.
albanbulku

albanbulku

Mechanical
Joined
Mar 5, 2013
Messages
30
Location
AL
Which are the best electrodes to weld these grades of steel pipes ????

Pipe welding of S355j2(+ N) with api 5L x60 ?
 
Sort by date Sort by votes
For the SMAW process, E7016/E7018 can be used. If full penetration from one side is required, E7010 should be used at least for the root and second pass.

 
Upvote 0 Downvote
Thank you stanweld.

How you think for E6010 for root pass) and E7018 for filler passes?

 
Upvote 0 Downvote
So it is ok.

Thanks for your answers mate.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
API 653 - Calculate Nozzle Tmin
Replies
1
Views
4K
Louisiana Inspector
Louisiana Inspector
K
  • Question Question
How to find the amount of precambering to be done before welding to avoid distortion?
Replies
9
Views
807
dtimberlake
D
Shafty1
  • Question Question
pipe clamp design
Replies
7
Views
6K
Stress_Eng
Stress_Eng
Ramadan Ahmed
  • Locked
  • Question Question
Welding Symbols
Replies
4
Views
2K
kjoiner
kjoiner
C
API 650 Annex S S.4.14.2 (c)
Replies
2
Views
4K
JStephen
JStephen

Part and Inventory Search

Sponsor

Back
Top