I have a 84 inch diam. conveyance pipe that will be going through a slurry wall. The pipe is putting a force of 145 kips on the wall. I need to come up with a design that will distribute this load. The force must be disperesed through the wall since the pipe is conecting to some flexible piping.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pipe through Tanke Slurry Wall
- Thread starter burnhakp
- Start date
Similar threads
- Locked
- Question
