S
salil
Guest
Hi All,
Resending my question.
How to make an associated table that will show all pipe point coordinates (hereI'm notusing Pro/Piping but the simple pipe option given in Pro/e)
Points are created with Co-ordsys offset option in datum pt.
It should get updated in case of any changes in the point dimensions X,Y,Z & the corresponjding Bend radius.
Table should look like the sample provided below
(points placed here just as a sample)
POINTS X Y Z R
POINT_A 2.84 2.25 0 .75
POINT_B 5.44 5.22 0 .75
POINT_C 5.38 8.55 1 .75
My kind request to Mr. Jason & other Pro gurus please have a look at this querry & try to help me out.
Thanks In Advance,
Salil.
Resending my question.
How to make an associated table that will show all pipe point coordinates (hereI'm notusing Pro/Piping but the simple pipe option given in Pro/e)
Points are created with Co-ordsys offset option in datum pt.
It should get updated in case of any changes in the point dimensions X,Y,Z & the corresponjding Bend radius.
Table should look like the sample provided below
(points placed here just as a sample)
POINTS X Y Z R
POINT_A 2.84 2.25 0 .75
POINT_B 5.44 5.22 0 .75
POINT_C 5.38 8.55 1 .75
My kind request to Mr. Jason & other Pro gurus please have a look at this querry & try to help me out.
Thanks In Advance,
Salil.
