Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Piezomaterial in ANSYS workbench

Status
Not open for further replies.
Engy Rashed

Engy Rashed

Mechanical
Joined
Nov 2, 2016
Messages
3
Location
EG
mp,perx,MATID,804.6

Could you please tell me in which unit I should put the permitivity of piezomaterial in commands in ANSYS workbench ??

I am solving an ultrasonic cleaner , trying to know its amplitude of displacement but I get very large numbers I don't know why ?
Anyone can help me in this ?
 
Sort by date Sort by votes
SI unit is F/m and dimension M-1·L-3·I2·T4. Derive what to use according to the consistent unit set that you are using in your analysis.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top